Click image to view full size image
Mill roll stand
1. Can be installed two bundles of paper reel because of the symmetric structure. Paper changing can be made
without stopping the machine.
2. Hydraulic driving for pape clamping, loosing, scending and descending, left and right moving and centering.
3. Ventilation butterfly disc of pneumatic brake system.
4. Double automatic expansion type clamping head which is 3 & 4 inches double stage type.
Technical parameters:
1. Paper clamping max:1800mm min:800mm
2. Paper diameter max:1500mm min:350mm
3. Single side max supporting weight: 2500Kg
4. Main roll diameter:242mm
5. Air source working pressure(Mpa):0.4---0.8Mpa
6. Power:380V 50Hz
Hydraulic system parameters:
1. Working pressure(Mpa):16---18Mpa
2. Hydraulic jar working range(up and down):100×440mm
3. Hydraulic jar working range(clamp/horizontal move):63×1300mm
4. Hydraulic station motor power:3KW Snatch(S2)working
Rated voltage:380V 50Hz
5. Hydraulic station magnetic valve power:220V 50 Hz
Spare part:
Name |
Model |
Quantity |
Button+ |
XB2BA21C |
1 set |
Button |
XB2BA42C |
1 set |
Brake decompression valve |
GR2000 |
1 set |
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Width 1400mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
MAIN FEATURES:
- Design Speed: 120m/min
- Working speed:60-100m/min
- Heating type: steam heat
- Cardan drive with gear box
- Corrugated roller alloy steel material
- Expiry width:1400mm,1600mm,1800mm, Corrugated flute roller diameter: 280mm
- Flute profiles: A,B,C,E etc.
- Drive positive speed gearbox adopts to low the noise, small gimbal transmission to separate power supply.
- Lift-lower of upper corrugating roller, pressure roller and glue roller are completed by pneumatic control.
- Axletree of corrugated and pressure roller adopts high temperature resistant lube.
- Glue parts auto supply glue circularly.
- Glue part can be running independently or non-independently while stopped. Adopt main motor frequency conversion control.
1. The paper sheet cutting machine mainly used for cutting paper roll or single corrugated paperboard to the required size vertically and horizontally.
2. It has the characteristics of short time order changing, cutting high precisely and running speed fast.
3. It adopts the variable frequency motor; the cutting length more accurate.
4. PLC & touch screen system is optional; it can directly adjust the order length and show the machine work status .operate more convenient